Alphabetical, MIL and P-Code. Index For DTCs

P NO. INDEX FOR DTC
*1: In Diagnostic Test Mode II (Self-diagnostic results), these numbers are controlled by NISSAN.
*2: These numbers are prescribed by SAE J2012.
*3: When the fail-safe operation occurs, the MIL illuminates.
*4: The MIL illuminates after TCM (Transmission Control Module) enters the fail-safe mode in two consecutive trips, if both the "Revolution sensor" and the "Engine speed signal" meet the fail-safe condition at the same time.
*5: When engine is running.
*6: 1st trip DTC No. is the same as DTC No.

NOTE: Regarding A32 models, "-B1" indicates right bank and "-B2" indicates left bank.









ALPHABETICAL INDEX FOR DTC
*1: In Diagnostic Test Mode II (Self-diagnostic results), these numbers are controlled by NISSAN.
*2: These numbers are prescribed by SAE J2012.
*3: When the fail-safe operation occurs, the MIL illuminates.
*4: The MIL illuminates after TCM (Transmission Control Module) enters the fail-safe mode in two consecutive trips, if both the "Revolution sensor" and the "Engine speed signal" meet the fail-safe condition at the same time.
*5: When engine is running.
*6: 1st trip DTC No. is the same as DTC No.

NOTE: Regarding A32 models, "-B1" indicates right bank and "-B2" indicates left bank.