Removal and Installation

IGNITION COIL, SPARK PLUG AND ROCKER COVER


Removal and Installation


REMOVAL
1. Remove intake manifold. Refer to Component Removal and Installation.
2. Remove ignition coil.

CAUTION:
- Handle ignition coil carefully and avoid impacts.
- Never disassemble.





3. Remove spark plug using suitable tool.

CAUTION:
Never drop or shock it.





4. Remove rocker cover.
- Loosen bolts in reverse order as shown.
Arrow indicates Engine front

INSPECTION AFTER REMOVAL

CAUTION:
- Never drop or shock spark plug.





- Checking and adjusting spark plug gap is not required between change intervals.
- If spark plug tip is covered with carbon, a spark plug cleaner may be used.






- Never use wire brush for cleaning spark plug.

INSTALLATION
1. Install the rocker cover gasket to the rocker cover.





2. Install rocker cover.
- Tighten bolts in two steps separately in numerical order as shown.





Arrow indicates Engine front

CAUTION:
Check if rocker cover gasket is not dropped from the installation groove of rocker cover.





3. Install spark plug using suitable tool.






CAUTION:
Never drop or shock it.
4. Install ignition coil.

CAUTION:
- Handle it carefully and avoid impacts.
- Never disassemble.
5. Install intake manifold. Refer to Component Removal and Installation.