B1758

B1758 THERMO PROTECTION





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, RF, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.COOL DOWN HYDRAULIC SYSTEM
Turn ignition switch OFF and wait at least 5 minutes.
- GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
3. Check DTC.
Is DTC detected?
YES - Go to B1758.
NO - INSPECTION END




Diagnosis Procedure
1.REPLACE SOFT TOP CONTROL UNIT
1. Turn ignition switch OFF.
2. Replace soft top control unit. Removal And Installation.
- INSPECTION END