Operation CHARM: Car repair manuals for everyone.

Removal And Installation





CENTER CONSOLE ASSEMBLY


Removal and Installation


REMOVAL

CAUTION:
Be careful not to scratch center console finishers and other parts.
1. Move shift lever into the drive (D) position (CVT) or neutral position (M/T), then remove shift lever handle. Refer to Removal And Installation (CVT: RE0F09B), Removal And Installation (CVT: RE0F10A), Removal And Installation (6M/T: RS6F52A).





2. Remove the cluster lid D (1).
3. Release the clips using a suitable tool, then lift the CVT or M/T finisher upward to remove. Refer to Removal And Installation.





4. Remove the storage bin (1).





5. Remove both instrument side masks (1).





6. Open the fuse block cover, remove the instrument lower cover screw (A), then remove the instrument lower cover (1).
Disconnect the asperator tube and the harness connectors.
7. Remove both the console side finishers.





8. Remove the console upper screws (A).





9. Remove the console side screws (A).
10. Position both RH and LH front seats forward.





11. Remove both the console rear screw covers, then remove the rear screws (A), then remove the console assembly.

INSTALLATION
Installation is in the reverse order of removal.