C1610

C1610 ENGINE STATUS SIGNAL





Description
EPS control unit receives the engine status signal from ECM via CAN communication line.




DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC REPRODUCTION PROCEDURE
With CONSULT-III
1. Turn the ignition switch OFF to ON.
2. Perform "EPS" self-diagnosis.
Is DTC "C1610" detected?
YES - Proceed to diagnosis procedure. C1610.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM ECM SELF-DIAGNOSIS
With CONSULT-III
1. Turn the ignition switch OFF to ON.
2. Perform "ENGINE" self-diagnosis. CONSULT-III Function.
Is any DTC detected?
YES - Check the DTC. Testing and Inspection.
NO - GO TO 2.
2.PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform "EPS" self-diagnosis.
Is DTC "C1610" detected?
YES - Replace EPS control unit. Exploded View.
NO - Check EPS control unit pin terminals for damage or loose connection with harness connector. If any item are damaged, repair or replace error-detected parts.