Removal And Installation

REAR PARCEL SHELF FINISHER


Removal and Installation


REMOVAL
1. Remove the halo upper frame assembly for bench seat or seat back for bucket seat. W/O Climate Controlled Seats for bench seat (w/o climate controlled seats), or W/O Climate Controlled Seats for bucket seat (w/o climate controlled seats), or With Climate Controlled Seats for bucket seat
(with climate controlled seats).
2. Remove high mounted stop lamp, if equipped. Removal And Installation.
3. Remove rear pillar finisher RH/LH. Removal And Installation.
4. Thread the rear seat belt RH/LH/center through vertical opening and release from rear parcel shelf finisher.
5. Release the clips, then remove rear parcel shelf finisher.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Make sure that clips are fully aligned with panel holes on body when installing, then press them in completely.