Front Power Window RH Circuit Inspection (Main Power Window And Door Lock/Unlock Switch Operation)

POWER WINDOW SYSTEM

Front Power Window RH Circuit Inspection (Main Power Window and Door Lock/Unlock Switch Operation)

1.CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL

1. Disconnect front power window motor RH.
2. Turn ignition switch ON.
3. Check voltage between front power window motor RH connector and ground.

OK or NG
OK - Replace front power window motor RH. Removal and Installation .
NG - GO TO 2.
2.CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT

1. Disconnect front power window motor RH and power window and door lock/unlock switch RH.
2. Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and front power window motor RH connector D105 (B) terminals 1, 3.

3. Check continuity between power window and door lock/unlock switch RH connector D104 (A) terminals 6, 7 and ground.

OK or NG
OK - GO TO 3.
NG - Repair or replace harness.
3.CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Check continuity between power window and door lock/unlock switch RH terminals.

OK or NG
OK - GO TO 4.
NG - Replace power window and door lock/unlock switch RH. Service and Repair.
4.CHECK GROUND SUPPLY CIRCUIT

1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between main power window and door lock/unlock switch and power window connector (A) and door lock/unlock switch RH connector (B).

3. Check continuity between main power window and door lock/unlock switch connector (A) and ground.

OK or NG
OK - GO TO 5.
NG - Repair or replace harness.
5.CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH SIGNAL

1. Connect main power window and door lock/unlock switch.
2. Turn ignition switch ON.
3. Check voltage between main power window and door lock/unlock switch connector and ground.

OK or NG
OK - Repair or replace harness.
NG - Replace main power window and door lock/unlock switch. Service and Repair.