Rear Power Window Motor RH Circuit Inspection

POWER WINDOW SYSTEM


Rear Power Window Motor RH Circuit Inspection

1.CHECK REAR POWER WINDOW SWITCH RH OUTPUT SIGNAL





1. Turn ignition switch OFF.
2. Disconnect rear power window motor RH.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor RH connector and ground.






OK or NG
OK - Replace rear power window motor RH. Removal and Installation .
NG - GO TO 2.
2.CHECK REAR POWER WINDOW MOTOR RH CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH.
3. Check continuity between rear power window switch RH connector D303 (A) terminals 4, 5 and rear power window motor RH connector D304 (B) terminals 1, 2.






4. Check continuity between rear power window switch RH connector D303 (A) terminals 4, 5 and ground.





OK or NG
OK - GO TO 3.
NG - Repair or replace harness.
3.CHECK POWER WINDOW SWITCH





1. Disconnect rear power window switch RH.
2. Check continuity between rear power window switch RH terminals.





OK or NG
OK - GO TO 4.
NG - Replace rear power window switch RH. Service and Repair .
4.CHECK REAR POWER WINDOW SWITCH RH CIRCUIT





1. Disconnect main power window and door lock/unlock switch.
2. Check continuity between power window main switch connector and rear power window switch RH connector.





3. Check continuity power window main switch connector and ground.





OK or NG
OK - Replace main power window and door lock/unlock switch. Service and Repair .
NG - Repair or replace harness.