Operation CHARM: Car repair manuals for everyone.

Removal And Installation





IGNITION COIL, SPARK PLUG AND ROCKER COVER


Removal and Installation


REMOVAL
1. Remove intake manifold. Component Removal And Installation.
2. Remove ignition coil.

CAUTION:
- Handle ignition coil carefully and avoid impacts.
- Never disassemble.
3. Remove spark plug using suitable tool.

CAUTION:
Never drop or shock it.





Arrow Indicates Engine front

4. Remove rocker cover.
- Loosen bolts in reverse order as shown.

INSPECTION AFTER REMOVAL

CAUTION:
- Never drop or shock spark plug.





- Checking and adjusting spark plug gap is not required between change intervals.
- If spark plug tip is covered with carbon, a spark plug cleaner may be used.










- Never use wire brush for cleaning spark plug.

INSTALLATION
1. Install the rocker cover gasket to the rocker cover.





Arrow Indicates Engine Front

2. Install rocker cover.
- Tighten bolts in two steps separately in numerical order as shown.






CAUTION:
Check if rocker cover gasket is not dropped from the installation groove of rocker cover.
3. Install spark plug using suitable tool.







CAUTION:
Never drop or shock it.
4. Install ignition coil.

CAUTION:
- Handle it carefully and avoid impacts.
- Never disassemble.
5. Install intake manifold. Component Removal And Installation.