Installation

ENGINE IMMOBILISER: CERTIFICATION ECU: INSTALLATION

INSTALLATION

1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)






(a) Install the certification ECU (smart key ECU assembly) with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connectors.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side Installation Part 1, Step 1-65.

5. INSTALL FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side Installation Part 1, Step 1-65.

6. REGISTER ECU COMMUNICATION ID
NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobiliser System.

7. REGISTER KEY
NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization Engine Immobiliser System.