Removal

ENGINE IMMOBILISER: TRANSPONDER KEY AMPLIFIER: REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH

HINT
Use the same procedure as for the RH side Removal.

2. REMOVE FRONT FLOOR FOOTREST Removal

3. REMOVE FOOTREST CLIP Removal

4. REMOVE COWL SIDE TRIM BOARD LH

HINT
Use the same procedure as for the RH side Removal.

5. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT
Use the same procedure as for the RH side Removal.

6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal

8. REMOVE INSTRUMENT PANEL FINISH PLATE





(a) Using a screwdriver with its tip wrapped in protective tape, remove the instrument panel finish plate.

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH





(a) Remove the 2 bolts.

(b) Disengage the claw and 5 clips and remove the lower instrument panel finish panel.

10. REMOVE TRANSPONDER KEY AMPLIFIER





(a) Disconnect the connector.

(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the transponder key amplifier.