Removal
DOOR LOCK: FRONT DOOR LOCK: REMOVAL
HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the RH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT ARMREST BASE UPPER PANEL Disassembly
3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly
4. REMOVE FRONT NO. 2 DOOR SERVICE HOLE COVER Disassembly
5. REMOVE OUTER REAR VIEW MIRROR Removal
6. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY Removal
7. REMOVE FRONT NO. 1 SPEAKER Removal
8. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly
9. REMOVE FRONT DOOR INSIDE PANEL PLATE Disassembly
10. REMOVE FRONT DOOR CHECK ASSEMBLY Disassembly
11. REMOVE FRONT DOOR WEATHERSTRIP Disassembly
12. REMOVE FRONT DOOR GLASS RUN Disassembly
13. REMOVE FRONT DOOR FRAME SUB-ASSEMBLY FRONT LOWER Disassembly
14. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly
15. REMOVE FRONT DOOR WINDOW FRAME REAR LOWER Disassembly
16. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly
17. REMOVE FRONT DOOR LOCK CYLINDER ASSEMBLY
(a) Remove the hole plug.
(b) Using a "Torx" socket wrench T30, loosen the screw and remove the front door lock cylinder.
18. REMOVE FRONT DOOR LOCK
(a) Using "Torx" socket wrench T30, loosen the 3 screws.
(b) Move the front door lock downward, remove the outside handle frame link and remove the front door lock.
(c) Disengage the 5 claws and open the cover.
(d) Disconnect the front door lock remote control cable and the front door inside locking cable.
(e) Remove the door lock wire harness seal.