Installation

A340E AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE





(a) Coat a new O-ring with Toyota Genuine ATF Type T-IV or equivalent, and install it onto the solenoid wiring.

(b) Install the solenoid wiring onto the case, and install the stopper plate.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the connectors to each shift solenoid valve.





2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

3. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Installation

4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

6. ADD AUTOMATIC TRANSMISSION FLUID

7. INSPECT AUTOMATIC TRANSMISSION FLUID A340E Automatic Transmission

8. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK