Installation

A750E AUTOMATIC TRANSMISSION: VALVE BODY ASSEMBLY: INSTALLATION

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY





(a) Install the shift solenoid valve S2 with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Install the shift solenoid valve S1 with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 56 in-lbf)

(c) Install the shift solenoid valve SR with the 2 bolts.

Torque : 6.4 Nm (65 kgf-cm, 56 in-lbf)

(d) Install the shift solenoid valves SLU and SL2 with the pin, lock plate and bolt.

Torque : 6.4 Nm (65 kgf-cm, 56 in-lbf)

(e) Install the shift solenoid valves SLT and SL1 with the pin, lock plate and bolt.

Torque : 6.4 Nm (65 kgf-cm, 56 in-lbf)

(f) Insert the pin of the lever into the hole of the manual valve.





(g) Install 3 new drum seal gaskets onto the transmission case.

(h) Install the 19 bolts.





Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

Bolt length:

Bolt A: 36 mm (1.42 in.)

Bolt B: 25 mm (0.98 in.)

2. INSTALL TRANSMISSION WIRE Installation

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY





(a) Install a new O-ring and the oil strainer with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

HINT
Remove all packing material and be careful not to drop oil on the contact surfaces of the transmission case and oil pan.

(a) Install a new gasket and the oil pan sub-assembly.

(b) Install the oil pan with the 20 bolts.





Torque : 4.4 Nm (45 kgf-cm, 39 in-lbf)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

6. PERFORM INITIALIZATION

A750F Automatic Transmission System

7. ADD AUTOMATIC TRANSMISSION FLUID

A750E Automatic Transmission