Installation

A750E AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE





(a) Install the transmission wire with the bolt.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the transmission wire connector.

2. CONNECT TRANSMISSION WIRE





(a) Connect the 7 connectors to the solenoid valves.

(b) Install the clamp with the bolt.

A - Torque : 10 Nm (100 kgf-cm, 7 ft-lbf)

B - Torque : 11 Nm (110 kgf-cm, 8 ft-lbf)

(c) Connect the ATF temperature sensor.

Wiring color:

a: Orange

b: Blue

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

6. PERFORM INITIALIZATION

A750F Automatic Transmission System

7. ADD AUTOMATIC TRANSMISSION FLUID

A750E Automatic Transmission