Removal

LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) Removal

3. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) Removal

4. REMOVE COWL SIDE TRIM BOARD LH Removal

5. REMOVE INSTRUMENT SIDE PANEL LH Removal

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Removal

7. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Removal

8. REMOVE TURN SIGNAL FLASHER ASSEMBLY

(a) Disconnect the connector.





(b) Remove the nut and flasher.