Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) Removal

3. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) Removal

4. REMOVE COWL SIDE TRIM BOARD LH Removal

5. REMOVE INSTRUMENT SIDE PANEL LH Removal

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Removal

7. REMOVE CURTAIN SHIELD AIRBAG CUTOFF SWITCH

(a) Disconnect the connector.





(b) Detach the 2 claws and remove the switch.