Generator with Hard Rubber Disc Clutch Assembly Overview

Generator with Hard Rubber Disc Clutch Assembly Overview

• Only generators by Hitachi are delivered as replacement parts. The Delphi generator is no longer produced. Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator.

• On generators with hard rubber disc clutch, this should generally be replaced with torsion-elastic clutch --> [ Generator with Torsion Elastic Clutch Assembly Overview ] Generator with Torsion Elastic Clutch Assembly Overview.





1 - Socket head bolt with washer

• M6 x 0.79 in

• 8 Nm

2 - Coolant pipe/T-piece

• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator

• allocation

3 - O-Ring

• Always replace

4 - Angle bracket

5 - Bolts

• M8 x 1.38 in

• 20 Nm

6 - Generator

• B+ wire fastener to generator, 15 Nm --> [ B+ Cable Mount to Generator ] Description and Operation

• Neither the voltage regulator nor the carbon brushes can be replaced individually; if a repair is required, the entire generator must be replaced.

• Generator, removing and installing --> [ Generator with Hard Rubber Disc Clutch ] Generator

• One-way clutch at generator, removing and installing --> [ Generator One-Way Clutch ] Generator

• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator

7 - Hard-rubber disc clutch

• Converting to torsion-elastic clutch --> [ Generator with Torsion Elastic Clutch Assembly Overview ] Generator with Torsion Elastic Clutch Assembly Overview.

8 - Hex bolts with socket head and point

• Converting to torsion-elastic clutch --> [ Generator with Torsion Elastic Clutch Assembly Overview ] Generator with Torsion Elastic Clutch Assembly Overview.

9 - Drive hub

• Converting to torsion-elastic clutch --> [ Generator with Torsion Elastic Clutch Assembly Overview ] Generator with Torsion Elastic Clutch Assembly Overview.

10 - Bolt

• Converting to torsion-elastic clutch --> [ Generator with Torsion Elastic Clutch Assembly Overview ] Generator with Torsion Elastic Clutch Assembly Overview.

11 - Alignment bushings

• Check if alignment bushings are equipped and securely seated. If alignment bushings are loose, coat them with commercially available grease before installing.

12 - O-Ring

• Always replace

13 - Coolant pipe

• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator

• allocate