Generator with Torsion Elastic Clutch Assembly Overview
Generator with Torsion Elastic Clutch Assembly Overview
• Only generators by Hitachi are delivered as replacement parts. The Delphi generator is no longer produced. Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator.
• On generators with hard rubber disc clutch, this should generally be replaced with torsion-elastic clutch --> [ Generator with Torsion Elastic Clutch Assembly Overview ] Generator with Torsion Elastic Clutch Assembly Overview.
1 - Socket head bolt with washer
• M6 x 0.79 in
• 8 Nm
2 - Coolant pipe/T-piece
• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator
• allocate
3 - O-Ring
• Always replace
• allocate
4 - Angle bracket
5 - Bolts
• M8 x 1.38 in
• 20 Nm
6 - Generator
• B+ wire fastener to generator, 15 Nm --> [ B+ Cable Mount to Generator ] Description and Operation
• Neither the voltage regulator nor the carbon brushes can be replaced individually; if a repair is required, the entire generator must be replaced.
• Generator, removing and installing --> [ Generator with Torsion Elastic Clutch ] Generator.
• One-way clutch at generator, removing and installing --> [ Generator One-Way Clutch ] Generator
• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator
7 - Torsion-elastic clutch
• Always replace
• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator
• allocate
8 - Drive gear
• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator
9 - Bolt
• M10 x 1 x 30 mm
• 50 Nm + 90°
• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator
10 - Alignment bushings
• Check if alignment bushings are equipped and securely seated. If alignment bushings are loose, coat them with commercially available grease before installing.
11 - O-Ring
• Always replace
12 - Coolant pipe
• Converting generator, Delphi to Hitachi --> [ Generator, Removing Delphi and Installing Hitachi ] Generator