Exhaust Gas NOx Sensor: Service and Repair

NOx Sensor Overview






1 Wiring Harness

• Insert into the bracket - item 8 -.

2 NOx Sensor (G295)

• 52 Nm

• The NOx sensor and NOx sensor control module cannot be separated.

• When installing, lower the right underbody panel.

• Release and disconnect the connector - item 6 -.

• Note the wire harness - item 1 - routing.

3 Exhaust Door Control Unit (J883)

4 NOx Reduction Catalytic Converter

• Removing and installing, refer to => [ NOx Reduction Catalytic Converter ] NOx Reduction Catalytic Converter.

5 NOx Sensor Control Module (J583)

• The NOx sensor and NOx sensor control module cannot be separated.

6 Connector

7 Nut

• 6 Nm

• Quantity: 2

8 Bracket

9 Bracket