C-Pillar Trim

C-Pillar Trim

Removing






Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

- Remove the rear sill trim. Refer to => [ Rear Sill Panel Trim ] Rear Sill Panel Trim.

- Remove the D-pillar trim. Refer to => [ D-Pillar Trim ] D-Pillar Trim.

- Remove spreader clips - 1 to 4 -.

- Swing upper C-pillar trim - 5 - inward and simultaneously pull it down to remove from the rear shelf - arrow -.

Installing

• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• Do not pinch the head curtain airbag when installing the C-pillar trim.

Install in reverse order of removal. Note the following:

Installation note: For example tightening specifications, replace components => [ C-Pillar Trim Assembly Overview ] C-Pillar Trim Assembly Overview.