Installation

MIRROR: INNER REAR VIEW MIRROR: INSTALLATION

INSTALLATION





1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY
(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.
Torque: 1.8 Nm (18 kgf-cm, 16in-lbf)
(b) Connect the connector.
2. INSTALL RAIN SENSOR COVER (w/ Driver Monitor Camera)




NOTICE:
- When installing the rain sensor cover, do not apply force to the object recognition camera areas labeled "X".
- When installing the rain sensor cover, apply force to the areas labeled "o" to attach the clips.





(a) While being careful not to apply force to the camera areas, attach the 2 claws and 2 clips to install the rain sensor cover.
(b) Push the stopper as shown in the illustration to fix the cover in place.





3. INSTALL RAIN SENSOR COVER
(a) Attach the 2 claws to install the rain sensor cover.
(b) Push the stopper as shown in the illustration to fix the cover in place.
4. INSTALL MAP LIGHT ASSEMBLY Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER LH Installation
7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation