Installation

HYBRID BATTERY CONTROL: BATTERY BLOWER: INSTALLATION

INSTALLATION

1. INSTALL NO. 1 HV BATTERY INTAKE DUCT





(a) Install the No. 1 HV battery intake duct to the battery cooling blower assembly.
2. INSTALL BATTERY COOLING BLOWER ASSEMBLY





(a) Install the battery cooling blower assembly with the 3 nuts and clip.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
(b) Install the 2 connectors to the battery cooling blower assembly.
3. INSTALL NO. 2 HV BATTERY INTAKE DUCT





(a) Install the No. 2 HV battery intake duct.
4. INSTALL NO. 3 HV BATTERY INTAKE DUCT





(a) Install the No. 3 HV battery intake duct with the clip.
5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH Installation
6. INSTALL REAR FLOOR FINISH PLATE Installation
7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation
8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation
9. INSTALL DECK TRIM SIDE BOARD RH Installation
10. INSTALL ROPE HOOK ASSEMBLY Installation
11. INSTALL ROPE HOOK Installation
12. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) Installation
13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation