Installation

POWER STEERING: DC / DC CONVERTER: INSTALLATION

INSTALLATION

1. INSTALL POWER STEERING CONVERTER ASSEMBLY





(a) Install the converter with the 4 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)





(b) Connect the 4 connectors, install the clamp on the vehicle front side, and install the nut.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Installation
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH Installation
4. INSTALL REAR FLOOR FINISH PLATE Installation
5. INSTALL TOOL BOX (w/o Spare Tire) Installation
6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)
7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation
8. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler) Installation
9. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation
10. INSTALL DECK TRIM SIDE BOARD RH Installation
11. INSTALL ROPE HOOK ASSEMBLY Installation
12. INSTALL ROPE HOOK Installation
13. INSTALL SERVICE PLUG GRIP
14. INSTALL BATTERY SERVICE HOLE COVER
15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

16. INSTALL BATTERY SERVICE HOLE COVER LH Installation
17. INSTALL BATTERY CARRIER Installation
18. INSTALL BATTERY Installation
19. INSTALL DECK TRIM SIDE BOARD LH
20. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation