Cabin Temperature Sensor / Switch: Service and Repair

PASSENGER COMPARTMENT TEMPERATURE SENSOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Side wall Side Wall Removal/Installation

b. Shift lever component (MTX) Service and Repair

c. Selector lever component (ATX) Service and Repair

d. Front console Front Console Removal/Installation

e. Front scuff plate inner (passenger's side) Front Scuff Plate Removal/Installation

f. Front side trim (passenger's side) Front Side Trim Removal/Installation

g. Side panel. (passenger's side) Side Panel Removal/Installation

h. Glove compartment Service and Repair

3. Remove the air hose.

4. Disconnect the passenger compartment temperature sensor connector.

5. Insert a tape-wrapped flathead screwdriver into the convex part of the passenger compartment temperature sensor and pry it to remove the passenger compartment temperature sensor together with passenger compartment temperature sensor holder.

6. Remove the passenger compartment temperature sensor.






7. Install in the reverse order of removal.