M Position Switch Inspection

M POSITION SWITCH INSPECTION [FS5A-EL]

CAUTION:
- Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

1. Disconnect the selector lever component connector.
a. Disconnect the negative battery cable.

b. Remove the rear console. Rear Console Removal/Installation

c. Disconnect the selector lever component connector.






2. Measure the continuity between the selector lever component terminals A and H.






- If there is any malfunction, replace the selector lever component. Automatic Transaxle Shift Mechanism Removal/Installation

M position switch specification