Removal And Installation

BACK DOOR


BACK DOOR HINGE : Removal and Installation


REMOVAL
1. Remove back door assembly. Refer to Removal And Installation.
2. Remove luggage side finisher upper (LH/RH). Refer to Removal And Installation.
3. Remove rear pillar finisher (LH/RH). Refer to Removal And Installation.
4. Remove clips of headlining at rear end. Refer to Removal And Installation.
5. Remove back door hinge mounting nuts (body side), and then remove back door hinge.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
- After installation, check back door open/close, lock/unlock operation.
- After installation, perform the fitting adjustment. Refer to Adjustments.