Coupe

BACK DOOR

BACK DOOR HINGE : Removal and Installation


REMOVAL

1.Remove back door assembly. Coupe.
2.Remove luggage side finisher upper (LH/RH). Removal And Installation.
3.Remove rear pillar finisher (LH/RH). Coupe.
4.Remove clips of headlining at rear end. Removal And Installation.
5.Remove back door hinge mounting nuts (body side), and then remove back door hinge.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
- After installation, check back door open/close, lock/unlock operation.
- After installation, perform the fitting adjustment. Coupe.