Removal And Installation

TRUNK LID LOCK

TRUNK LID LOCK : Removal and Installation


REMOVAL

1.Remove trunk lid weather-strip. Roadster.
2.Remove trunk lid rear plate. Trunk Rear Plate.
3.Remove bolts from trunk lid opener cable.
4.Remove mounting nuts, and then remove trunk lid lock assembly.
5.Disconnect trunk lid opener actuator connector.
6.Using a flat-bladed screwdriver disconnect trunk lid opener cable from trunk lid lock assembly.
7.Remove trunk lid side finisher. Trunk Side Finisher.
8.Remove rear parcel shelf finisher assembly. Rear Parcel Shelf Finisher Assembly.
9.Remove bolts, and then remove trunk lid opener key cylinder cover.
10.Remove bolts, and then remove trunk lid opener key cylinder assembly.
11.Remove bolts, and then remove trunk lid opener key cylinder from trunk lid opener key cylinder bracket.
12.Disconnect trunk lid opener cable from trunk lid opener key cylinder.
13.Remove storage room finisher. Storage Room Finisher.
14.Remove rear speaker. Without Navigation. (with rear speaker)





15.Remove mounting bolts (A), and then remove side parcel shelf cover LH (1). (without rear speaker)
16.Disconnect clips, and then remove trunk lid opener cable.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
After installation, check back door open/close, lock/unlock operation.