Removal And Installation - Xenon

FRONT COMBINATION LAMP

Removal and Installation - Xenon


FRONT COMBINATION LAMP - XENON

Removal
1.Disconnect the battery negative terminal. Refer to "Removal and Installation (Battery)" Removal And Installation.
2.Remove the front bumper fascia. Refer to "Removal and Installation" Removal And Installation.
3.Ensure the lighting switch is OFF.





4.Remove the front combination lamp bolts (A).
5.Pull the front combination lamp (1) forward.
6.Disconnect the harness connectors from the front combination lamp (1).
Installation
Installation is in the reverse order of removal.
NOTE:
After installation perform headlamp aiming adjustment. Refer to "Aiming Adjustment" Adjustments.