Selector Mechanism Overview, from 11 September 2009

Selector Mechanism Overview, from 11 September 2009






1 Handle with Cover

• Do not remove the handle unnecessarily. For manual release, only the cover must be removed. Refer to => [ Selector Lever Manual Release ] Procedures.

• Removing and installing, refer to => [ Selector Lever Handle ] Shift Lever Handle.

2 Center Console Cover

• Is installed only occasionally.

3 Selector Mechanism with Selector Lever and Cable

• With the shift lock solenoid.

• The selector mechanism and the selector lever cable cannot be separated from each other. Both are removed at the same time.

• Removing and installing, refer to => [ Selector Mechanism and Cable, from 11 September 2009 ] Selector Mechanism and Cable, from 11 September 2009.

• Checking, refer to => [ Selector Lever Cable, Checking ] Testing and Inspection.

• Adjusting, refer to => [ Selector Lever Cable, Adjusting ] Adjustments.

4 Bolt

• 8 Nm

5 Nut

• M6 - 8 Nm

• M8 - 20 Nm

• Quantity: 4

6 Selector Housing

• Available only together with the selector mechanism, refer to the Parts Catalog.

• Removing, refer to => [ Selector Mechanism and Housing, from 11 September 2009 ] Selector Mechanism and Housing, from 11 September 2009.

7 Bracket

• For the selector lever cable.

8 Selector Lever Cable

• Can only be replaced together with the selector mechanism; refer to => [ Selector Mechanism with Lever ] Shift Mechanism with Lever.

9 Transmission

10 Tunnel/Body