Selector Mechanism Overview
Selector Mechanism Overview
Move the selector lever into P and set the parking brake before working with the engine running.
1 Selector Lever Handle
• Refer to => [ Selector Lever Handle ] Selector Lever Handle
2 Sleeve
• Removing and Installing, refer to => [ Selector Lever Handle ] Selector Lever Handle
3 Cover Molding
• Refer to => [ Selector Lever Handle and Shift Mechanism Cover Overview ] Selector Lever Handle and Shift Mechanism Cover Overview
4 Frame
• Refer to => [ Selector Lever Handle and Shift Mechanism Cover Overview ] Selector Lever Handle and Shift Mechanism Cover Overview
5 Cover
• Refer to => [ Selector Lever Handle and Shift Mechanism Cover Overview ] Selector Lever Handle and Shift Mechanism Cover Overview
6 Guide
• Refer to => [ Selector Lever Handle and Shift Mechanism Cover Overview ] Selector Lever Handle and Shift Mechanism Cover Overview
7 Selector Lever Cable
• Refer to => [ Selector Lever Cable Overview ] Selector Lever Cable Overview
• Do not bend
• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.
• Removing and installing => [ Selector Lever Cable ] Selector Lever Cable
• Adjusting, refer to => [ Selector Lever Cable, Checking and Adjusting ] Procedures
• In case of damaged rubber boot, selector lever cable must be replaced
• When installing, be careful not to twist the rubber sleeve on transmission side.
8 Selector Mechanism Shift Unit
• With affixed gasket
9 Bolt
• Description, refer to => [ Selector Mechanism Function Unit, Manual Release Overview ] Selector Mechanism Function Unit, Manual Release Overview
10 Selector Mechanism Function Unit
• Description, refer to => [ Selector Mechanism Function Unit, Manual Release Overview ] Selector Mechanism Function Unit, Manual Release Overview
11 Securing Plate
• For selector lever cable to shift mechanism function unit, refer to => [ Selector Lever Cable Overview ] Selector Lever Cable Overview
12 Bracket
13 Bolt
• 2 Nm
14 Actuating Mechanism for Manual Release