Selector Shaft Seal

Selector Shaft Seal

Special tools, testers and auxiliary items required

• Sleeve (VW 423)

• Pulling Hook (T20143/1)

• Sealing grease (G 052 128 A1)

Procedure

- Completely remove the air filter housing.

Plastic selector relay lever - 1 -:





- Pull the securing mechanism forward as far as the stop in the direction of - arrow 1 - and then unlock to the left in the direction of - arrow 2 -.

- Press the selector relay lever forward in direction of - arrow 3 - while pulling the selector cable out of the control cable retainer.

- Remove the selector relay lever with catch to Model Year 2007 => [ Installation Position of Transmission
Shift Lever/Selector Relay Lever ] Transmission Shift Lever and Selector Relay Lever to Model Year 2007 Assembly Overview

- Remove the selector relay lever with catch from Model Year 2008=> [ Remove the Selector Relay Lever from the Transmission Shift Lever and
Attach ] Shift Cable and Selector Cable From Model Year 2008 Assembly Overview

Metal selector relay lever





- Pull off securing clip - 2 - and press selector relay lever - 3 - to the side and out of the bearing.

All Vehicles

• If the selector relay lever cannot be removed due to the transmission bracket, remove the selector cable from the selector relay lever. Remove the slide shoe from the transmission shift lever.

- Remove nut - 4 - and remove transmission shift lever - 1 -.

- Pry out the shaft sealing ring using the (T20143/1).





- Lightly oil outer circumference of new shaft seal.

- Drive in new shaft seal as far as stop without tilting it.

- Fill area between sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).





- Drive in the shaft sealing ring using the sleeve (VW 423).





- Install the transmission shift lever and selector relay lever. Refer to => [ Transmission Shift Lever and Selector Relay Lever to Model Year 2007 Assembly Overview ] Transmission Shift Lever and Selector Relay Lever to Model Year 2007 Assembly Overview or => [ Shift Cable and Selector Cable from Model Year 2008 Assembly Overview ] Shift Cable and Selector Cable From Model Year 2008 Assembly Overview.

• The transmission shift lever can only be inserted in one position.

- Install the air filter housing.