Flange Shaft and Seals on Bevel Box Assembly Overview

Flange Shaft and Seals on Bevel Box Assembly Overview






1 Nut

• Replace

• 480 Nm

2 Bevel Box Output Flange

3 Output Flange Cover Cap

• Replace if damaged

4 Shaft Seal

• For output flange bevel box

• Replace, refer to => [ Bevel Box Drive Flange Seal ] Final Drive, Differential (02QA Manual Transmission)

5 Seal on Bevel Box

• Between the bevel box and transmission

• Replace, refer to => [ Seal between Transmission and Bevel Box ] Seal Between Transmission and Bevel Box

6 Bevel Box

• Removing and installing, refer to => [ Bevel Box, Removing ] Bevel Box, Removing

7 Drain Plug

• 60 Nm

• For the oil drain hole for the bevel box

8 Shaft Seal

• For the right flange shaft on the outside of the bevel box

• Replace, refer to => [ Right Flange Shaft Seat on Outer Bevel Box, Replacing ] Right Flange Shaft Seat on Outer Bevel Box, Replacing

9 Drain Plug

• For bevel box oil filler hole

• Tightening specification, refer to => [ Bevel Box Oil Filler Bolt ] 02QA Manual Transmission

10 Bolt

• Replace

• 40 Nm plus an additional 45° turn

• Quantity: 4

• Bevel box to transmission

11 Breather Pipe

12 Ventilation Cap

13 Bolt

• Replace

• 33 Nm

14 Right Drive Flange

• Removing and installing, refer to => [ Right Flange Shaft ] Right Flange Shaft

15 Oil Seal

• Replace

16 Needle Bearing (polygon bearing)

• If the flange shaft is difficult to move when it is removed, this is not a fault

• Acoustical test only when installed

• Check for damage, for example for cracks on the out race

• Replace, refer to => [ Right Flange Shaft Needle Bearing ] Right Flange Shaft Needle Bearing

17 Needle Bearing (polygon bearing)

• If the flange shaft is difficult to move when it is removed, this is not a fault

• Acoustical test only when installed

• Check for damage, for example for cracks on the out race

• Replace, refer to => [ Right Flange Shaft Needle Bearing ] Right Flange Shaft Needle Bearing

18 Securing Ring

• Replace