Back Pillar Garnish

LUGGAGE FLOOR TRIM

BACK PILLAR GARNISH : Removal and Installation


REMOVAL

1.Remove luggage side lower finisher. "LUGGAGE SIDE LOWER FINISHER : Removal and Installation" Luggage Side Lower Finisher.
2.Remove cap of back door finisher side (LH), and then remove stud ball. Refer to "BACK DOOR SUPPORT ROD : Removal and Installation" Back Door Support Rod (LH side only).





3.Disengage back pillar garnish (1) fixing clips and pawl using a remover tool (A), and then remove back pillar garnish.






INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Visually check the clips and pawl for deformation and damage during installation. Replace with new ones if necessary.
- When installing back pillar garnish, check that clips and pawl are securely fitted in body panel holes, and press them in.