Removal

PARKING BRAKE: ELECTRIC PARKING BRAKE ECU: REMOVAL

REMOVAL

1. REMOVE BATTERY SERVICE HOLE COVER LH

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Battery
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

4. REMOVE BATTERY SERVICE HOLE COVER

5. REMOVE SERVICE PLUG GRIP Removal

6. REMOVE TOOL BOX
7. REMOVE SPARE TIRE
8. REMOVE BATTERY Removal

9. REMOVE BATTERY CARRIER Removal

10. REMOVE ROPE HOOK

11. REMOVE ROPE HOOK ASSEMBLY

12. REMOVE DECK TRIM SIDE BOARD RH

13. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

14. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal

15. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

16. REMOVE REAR FLOOR FINISH PLATE

17. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

18. REMOVE SEAT VIBRATOR MODULE (for Ottoman) Removal

19. REMOVE REAR ACTIVE STABILIZER CONTROL ECU (w/ Active Stabilizer System) Removal

20. REMOVE SEAT BELT CONTROL ECU Removal

21. REMOVE ELECTRIC PARKING BRAKE ECU






(a) Disconnect the 2 ECU connectors.
(b) Remove the 2 nuts and ECU.