Removal

PARKING BRAKE: ELECTRIC PARKING BRAKE ECU: REMOVAL

REMOVAL

1. REMOVE BATTERY SERVICE HOLE COVER LH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
4. REMOVE DECK TRIM SIDE BOARD LH (w/ Spare Tire)
5. REMOVE BATTERY SERVICE HOLE COVER Removal
6. REMOVE SERVICE PLUG GRIP Removal
7. REMOVE SPARE TIRE (w/ Spare Tire)
8. REMOVE BATTERY Removal
9. REMOVE BATTERY CARRIER Removal
10. REMOVE ROPE HOOK Removal
11. REMOVE ROPE HOOK ASSEMBLY Removal
12. REMOVE DECK TRIM SIDE BOARD RH Removal
13. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal
14. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal
15. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal
16. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)
17. REMOVE TOOL BOX (w/o Spare Tire) Removal
18. REMOVE REAR FLOOR FINISH PLATE Removal
19. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal
20. REMOVE SEAT VIBRATOR MODULE (for Ottoman) Removal
21. REMOVE REAR ACTIVE STABILIZER CONTROL ECU (w/ Active Stabilizer System) Removal
22. REMOVE SEAT BELT CONTROL ECU Removal
23. REMOVE ELECTRIC PARKING BRAKE ECU





(a) Disconnect the 2 ECU connectors.
(b) Remove the 2 nuts and ECU.