Installation

HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT: INSTALLATION

1. INSTALL BLOWER ASSEMBLY

(a) Install the blower assembly with the claw and screw.





(b) Connect the connector.

2. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY Installation

3. INSTALL NO. 2 AIR DUCT

(a) Install the No. 2 air duct with the screw.





4. INSTALL AIR CONDITIONER UNIT ASSEMBLY

(a) Using pliers, grip the claws of the clip and slide the clip to connect the heater water inlet hose.

(b) Using pliers, grip the claws of the clip and slide the clip to connect the heater water outlet hose.

(c) Install the air conditioner unit assembly with the 3 bolts and 2 screws.





HINT
Tighten the bolts and screw to the instrument panel reinforcement in the order shown in the illustration.

Bolt - Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

5. INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

(a) Driver seat side:

(1) Using a T40 "TORX" socket, install the instrument panel reinforcement with the 2 "TORX" bolts.





Text in Illustration





(2) Install the bolt.

(b) Passenger seat side:

(1) Using a 12 mm hexagon wrench, install the instrument panel reinforcement with the 2 collars.

Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

(2) Using a T40 "TORX" socket, install the 2 "TORX" bolts.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(3) Install the bolt.

(c) Install the 6 caps.

(d) Install the instrument panel reinforcement with the 3 bolts and nut.





Text in Illustration





Bolt B - Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

Nut - Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(e) Install the bolt [A] and cap.

(f) Connect each connector and engage each clamp.

(g) Install the 2 earth wires with the 2 bolts.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(h) Install the 2 junction blocks with the 2 bolts and 3 nuts.

Bolt - Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)

Nut - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

6. INSTALL ID CODE BOX (IMMOBILISER CODE ECU) Installation

7. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Manual (SOS) Switch) Installation

8. INSTALL DISTANCE CONTROL ECU (w/ Dynamic Radar Cruise Control System) Installation

9. INSTALL SKID CONTROL BUZZER Installation

10. INSTALL CLEARANCE WARNING BUZZER (w/ Intuitive Parking Assist System) Installation

11. INSTALL MULTI-MEDIA INTERFACE ECU WITH BRACKET Installation

12. INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY

(a) Attach the 4 claws to install the lower defroster nozzle assembly.





13. INSTALL STEERING COLUMN ASSEMBLY Installation

14. INSTALL BRAKE PEDAL RETURN SPRING Installation

15. INSTALL NO. 1 AIR DUCT Installation

16. CONNECT STEERING SLIDING YOKE SUB-ASSEMBLY Installation

17. INSTALL INSTRUMENT PANEL STAY Installation

18. INSTALL INSTRUMENT PANEL CLIP Installation

19. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY Installation

20. CONNECT NO. 2 INSTRUMENT PANEL WIRE Installation

21. INSTALL NO. 1 CONSOLE BOX DUCT Installation

22. INSTALL NO. 2 CONSOLE BOX DUCT Installation

23. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY (w/ Front Center Speaker) Installation

24. INSTALL NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY Installation

25. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

26. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

27. INSTALL FRONT PILLAR GARNISH LH Installation

28. INSTALL FRONT PILLAR GARNISH RH

HINT
Use the same procedure as for the LH side Installation.

29. INSTALL POWER SOURCE CONTROL ECU Installation

30. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

31. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

32. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

33. INSTALL SIDE INSTRUMENT PANEL RH Installation

34. INSTALL FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure as for the LH side Installation.

35. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure as for the LH side Installation.

36. INSTALL COMBINATION METER ASSEMBLY Installation

37. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

38. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

39. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

40. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

41. INSTALL SIDE INSTRUMENT PANEL LH Installation

42. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

43. INSTALL FRONT DOOR SCUFF PLATE LH Installation

44. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation

45. INSTALL STEERING COLUMN COVER Installation

46. ADJUST SPIRAL CABLE Installation

47. INSTALL STEERING WHEEL ASSEMBLY Installation

48. INSTALL STEERING PAD Installation

49. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

50. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

51. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

52. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

53. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

54. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

55. INSTALL CONSOLE BOX Installation

56. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Installation

57. INSTALL CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Installation

58. INSTALL REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray) Installation

59. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Installation

60. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

61. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

62. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

63. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

64. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

65. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation

66. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation

67. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation

68. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

69. INSTALL FRONT WIPER ARM HEAD CAP Installation

70. INSTALL ROOF DRIP SIDE FINISH MOULDING LH

71. INSTALL ROOF DRIP SIDE FINISH MOULDING RH

HINT
Use the same procedure as for the LH side .

72. INSTALL FRONT UPPER FENDER PROTECTOR LH Installation

73. INSTALL FRONT UPPER FENDER PROTECTOR RH

HINT
Use the same procedure as for the LH side Installation.

74. INSTALL HEATER WATER INLET HOSE

(a) Install the water hose and attach the clip.

75. INSTALL HEATER WATER OUTLET HOSE

HINT
Use the same procedure as for the water inlet hose.

76. INSTALL COOLER REFRIGERANT LIQUID PIPE A

(a) Remove the vinyl tape attached to the pipe.

(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the cooler refrigerant liquid pipe A.

Compressor oil:

ND-OIL 8 or equivalent

(c) Install the O-ring on the cooler refrigerant liquid pipe A.

(d) Install the cooler refrigerant liquid pipe A to the fitting hole.

77. INSTALL SUCTION PIPE SUB-ASSEMBLY

(a) Remove the vinyl tape attached to the pipe.

(b) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the suction pipe sub-assembly.

Compressor oil:

ND-OIL 8 or equivalent

(c) Install the O-ring on the suction pipe sub-assembly.

(d) Move the hook connector in the direction indicated by the arrow in the illustration.





(e) Insert the pipe joints into the fitting holes securely and tighten the bolt.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

78. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

79. CHARGE REFRIGERANT Service and Repair

80. WARM UP ENGINE Service and Repair

81. INSPECT FOR REFRIGERANT LEAK Service and Repair

82. INSTALL ENGINE ROOM SIDE COVER LH Installation

83. INSTALL ENGINE ROOM SIDE COVER RH Installation

84. INSTALL COOL AIR INTAKE DUCT SEAL Installation