Climate Control Unit Removal [Manual Air Conditioner]

CLIMATE CONTROL UNIT REMOVAL [MANUAL AIR CONDITIONER]

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Front scuff plate inner Front Scuff Plate Removal/Installation

b. Front side trim Front Side Trim Removal/Installation

c. Side wall Side Wall Removal/Installation

d. Shift lever component (MTX) Service and Repair

e. Selector lever component (ATX) Service and Repair

f. Front console Front Console Removal/Installation

g. Hood release lever Service and Repair

h. Lower panel Lower Panel Removal/Installation

i. Side panel (passenger's side) Side Panel Removal/Installation

j. Glove compartment Service and Repair

k. Column cover Service and Repair

3. Remove the center panel module. Center Panel Module Removal/Installation

4. Remove the clamp.






5. Remove the wire clamp with air mix wire and airflow mode wire from the A/C unit.

6. Release the left and right tabs and remove in the order indicated in the table.










Wire Removal Note

1. Remove the E-ring from wire clamp.

2. Slide the wire clamp in the direction shown in the figure and remove it.