Shock Absorbing Pad Removal/Installation

SHOCK ABSORBING PAD REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate inner Front Scuff Plate Removal/Installation

c. Rear scuff plate Rear Scuff Plate Removal/Installation

d. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

e. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

f. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

g. Rear package tray lid Service and Repair

h. Sub-trunk Service and Repair

i. Third-row seat Third-Row Seat Removal/Installation

j. Rear header trim Rear Header Trim Removal/Installation

k. Trunk end trim Trunk End Trim Removal/Installation

l. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

m. Cargo compartment light Service and Repair

n. Trunk side trim

o. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

p. C-pillar trim C-Pillar Trim Removal/Installation

q. Map light Service and Repair

r. Assist handle Service and Repair

s. Sunvisor Service and Repair

t. Headliner Headliner Removal/Installation

4. Pull the shock-absorbing pad outward and detach pins A and tabs B.

5. Remove the shock-absorbing pad.






6. Install in the reverse order of removal.