Climate Control Unit Installation - Manual Air Conditioner
CLIMATE CONTROL UNIT INSTALLATION [MANUAL AIR CONDITIONER]
1. Install the wire clamp to A/C unit.
2. Install E-ring to each wire.
3. Pass each wire through the following routes and connect to A/C unit.
4. Connect the climate control unit connector, fan switch connector.
5. Install the climate control unit.
6. Connect each wire to A/C unit.
7. Install the center panel module. Center Panel Removal/Installation
8. Install the following parts:
a. Column cover Service and Repair
b. Glove compartment Service and Repair
c. Side panel (passenger's side) Side Panel Removal/Installation
d. Lower panel Lower Panel Removal/Installation
e. Hood release lever Service and Repair
f. Front console Front Console Removal/Installation
g. Selector lever component (ATX) Service and Repair
h. Shift lever component (MTX) Service and Repair
i. Side wall Side Wall Removal/Installation
j. Front side trim Front Side Trim Removal/Installation
k. Front scuff plate Front Scuff Plate Removal/Installation
9. Connect the negative battery cable.
10. Install the battery cover. Removal and Replacement
E-ring Installation Note
1. Install the wires as shown in the figure.