Ventilator Grille Removal/Installation

VENTILATOR GRILLE REMOVAL/INSTALLATION

1. Remove the following parts:
a. Front scuff plate Front Scuff Plate Removal/Installation

b. Front side trim Front Side Trim Removal/Installation

c. Rear console Rear Console Removal/Installation

d. Shift lever knob (MTX) Service and Repair

e. Side wall Side Wall Removal/Installation

f. Front console component Front Console Component Removal/Installation

g. Hood release lever Service and Repair

h. Lower panel Lower Panel Removal/Installation

i. Side panel Side Panel Removal/Installation

2. Rotate the ventilator grille to the notch in the direction of the arrow (1) shown in the figure and pull it in the direction of the arrow (2) to remove it.






3. Install in the reverse order of removal.