Removal And Installation

REAR TRIM


SEATBACK CENTER FINISHER : Removal and Installation


REMOVAL
1. Remove both seat assembly. Removal And Installation.
2. Remover center console assembly. Removal And Installation.
3. Remove rear side finisher (LH/RH). Removal And Installation.
4. Remove rear parcel shelf cover (LH/RH). Removal And Installation.
5. Remove seatback center finisher fixing clips.





6. Remove rear side finisher speaker harness connector (A) from seatback center finisher (1) as shown in the figure.
7. Pull seatback center finisher up to remove.

INSTALLATION
Note the following item, and install in the reverse order of removal.

CAUTION:
Check that clips are securely fitted in panel holes on body when installing, and then press them in.