Relay Carrier and Fuse Panel In Instrument Panel and A-Pillar Assembly Overview

Relay Carrier and Fuse Panel in Instrument Panel and A-Pillar Assembly Overview






1 4-pin Relay/Fuse Panel and Threaded Connection

• Under the left of the instrument panel

• Removing and installing, refer to => [ 4-Pin Relay/Fuse Panel with Threaded Connection ] 4-Pin Relay/Fuse Panel With Threaded Connection

2 Vehicle Electrical System Control Module (J519)

• Removing and installing, refer to => [ Vehicle Electrical System Control Module ] Vehicle Electrical System Control Module

3 Relay/Fuse Panel Mount with Vehicle Electrical System Control Module (J519)

• Removing and installing, refer to => [ Relay/Fuse Panel Mount with Vehicle Electrical System Control Module ] Relay/Fuse Panel Mount With Vehicle Electrical System Control Module

4 3-pin Relay/Fuse Panel

• Under the left of the instrument panel

• Removing and installing, refer to => [ 3-Pin Relay/Fuse Panel ] 3-Pin Relay/Fuse Panel

5 Passenger Side A-pillar 6-pin Connector Station

• Removing and installing, refer to => [ Passenger Side A-Pillar 6-Pin Connector Station ] Passenger Side A-Pillar 6-Pin Connector Station

6 Fuse Panel D (SD)

• On the right of the instrument panel

• Removing and installing, refer to => [ Fuse Panel D with Right Instrument Panel Fuse Panel ] Fuse Panel D With Right Instrument Panel Fuse Panel

7 Right central tube

8 Instrument Panel CAN Cut-Off Connector (T46s)

• Removing and installing, refer to => [ Instrument Panel CAN Cut-Off Connector ] Instrument Panel CAN Cut-Off Connector

9 Left Central Tube

10 Fuse Panel C (SC)

• On the left of the instrument panel

• Removing and installing, refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] Fuse Panel C With Left Instrument Panel Fuse Panel

11 Interior CAN Cut-Off Connector (T46i)

• Removing and installing, refer to => [ Interior CAN Cut-Off Connector ] Interior CAN Cut-Off Connector

12 Driver Side A-pillar 6-pin Connector Station

• On the left of the instrument panel

• Removing and installing, refer to => [ Driver Side A-Pillar 6-Pin Connector Station ] Driver Side A-Pillar 6-Pin Connector Station

Relay/fuse panel mount tightening specifications





1. Retaining pins

2. Nuts - 3 Nm

3. Relay/fuse panel mount with vehicle electrical system control module (J519)

4-pin relay/fuse panel with threaded connection, tightening specifications





1. Electrical wire - 9 Nm

2. Electrical wire - 9 Nm

3. 4-pin relay/fuse panel