Removal
2AZ-FXE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL
1. REMOVE THROTTLE BODY
(a) Remove the throttle body Removal.
2. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
(a) Remove the front suspension crossmember sub-assembly Removal.
3. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal
4. REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR Removal
5. REMOVE REAR ENGINE MOUNTING BRACKET Removal
6. REMOVE INTAKE MANIFOLD
(a) Disconnect the 2 air hoses and remove the bolt and gas filter bracket.
(b) Remove the No. 2 ventilation hose.
(c) Remove the 5 bolts, 2 nuts and intake manifold.
(d) Remove the No. 1 intake manifold to head gasket.
(e) Remove the No. 1 intake manifold insulator.