Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview
Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.
1 Screw
• 3 Nm
2 Fuse Panel
• Removing and installing, refer to => [ Fuse Holder, Front End ] Fuse Holder, Front End.
3 Nut
• 3 Nm
4 E-Box, in Plenum Chamber, Right Side
• Removing and installing, refer to => [ E-Box Right Plenum Chamber ] E-Box Right Plenum Chamber.
• With Suppressor (C24) , removing and installing, refer to => [ Suppressor (C24) ] Suppressor (C24).
5 Relay and Fuse Carrier
• With Fuse Panel A (SA).
• Removing and installing, refer to => [ Fuse Panel in Engine Compartment E-Box ] Fuse Panel in Engine Compartment E-Box.
• Relay/fuse panel in engine compartment E-box on the right side.
• Removing and installing, refer to => [ Relay and Fuse Panel in Right Plenum Chamber E-Box ] Relay and Fuse Panel in Right Plenum Chamber E-Box.
6 Screw
• 3.5 Nm
• Quantity: 4
7 Cover
• For E-Box, in Plenum Chamber, Right Side.
8 Battery Jump Start Pin
• 20 Nm
• Negative terminal clamp.
9 Right Front Door Cut-Off Connector
• Disconnecting, refer to => [ Front Door Cut-Off Connector, Disconnecting ] Front Door Cut-Off Connector, Disconnecting.
10 Right Rear Door Cut-Off Connector
• Disconnecting, refer to => [ Rear Door Cut-Off Connector, Disconnecting ] Rear Door Cut-Off Connector, Disconnecting.
11 Fuse Panel D (SD)
• In the luggage compartment on the battery.
• Removing and installing, refer to => [ Fuse Panel D in Luggage Compartment ] Fuse Panel D in Luggage Compartment.
12 Battery
13 Left Rear Door Cut-Off Connector
• Disconnecting, refer to => [ Rear Door Cut-Off Connector, Disconnecting ] Rear Door Cut-Off Connector, Disconnecting.
14 Left Front Door Cut-Off Connector
• Disconnecting, refer to => [ Front Door Cut-Off Connector, Disconnecting ] Front Door Cut-Off Connector, Disconnecting.
Tightening Specification: Fuse Panel
1. Ground wires - 7.5 Nm
2. Ground connection for the ground wire on the longitudinal member - 9 Nm
3. Coolant Fan Fuse (S42) - 7.5 Nm
4. Terminal 30 wire Junction 2 (TV22) - 9 Nm
5. Coolant Fan Second Speed Fuse (S104) - 7.5 Nm
Tightening Specification: Fuse Panel D (SD)
1. Electrical wire - 7.5 Nm
2. Nut - 9 Nm
3. Nut - 9 Nm
4. Fuse panel D (SD) inside the luggage compartment
5. Positive wire to the engine - 7.5 Nm
6. Bolt - 2.5 Nm
7. Battery Interrupt Igniter (N253).
8. Electrical wire - 18 Nm